For the inspection parameters of iron packing belt, it is necessary to understand
It is necessary for us to understand the inspection parameters of iron packing belt. Only in this way can we ensure that the quality of iron packing belt is qualified!
1. Surface size: First of all, the state has stipulated the thickness and width of the cross section of the packing belt. It contains pressure pattern, width tolerance -/+0.8mm, thickness tolerance -/+0.1mm.
2. Tension: The tension strength that the packing belt can withstand should be accurate to 1kg. The conversion rate between cattle and kg can be calculated as 9.8.
3. Weight per meter: The actual weight of the packing belt per meter, accurate to 0.1g.
4. Net weight: The actual weight of each reel packing tape after removing the core and outer packaging should be accurate to 0.1kg.
5. Length: the length of each roll packing tape can be obtained by calculation. The formula is: length = net weight ÷ weight per meter, and the value should be accurate to 1.0m.
We should carry out reasonable inspection on the iron packing belt in accordance with the above requirements, and hope it is helpful to you!
上一條：沒有了
下一條：沒有了
